HP Pavilion 11 x360 Battery Replacement

Step 1 Remove Screws



• Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.
• You must remove eleven screws.
• Four 9mm screws with the PH0 screwdriver.
• Seven 6mm screws with the PH0 screwdriver.
Step 2 Remove Backing




• Use the spudger to pry the corners of the laptop near the display hinges.
• Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.
• When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!
Step 3 Detach Cable
• Use the plastic opening tool to lift the white tab up at the connection.
• Pull the cable outwards.
Step 4 Battery
• Remove the four 6mm screws from the battery with the PH0 screwdriver.
Step 5
• Use the spudger to pry up the blue/white speaker wires that are routed beside the battery.
Step 6
• Remove the battery cable from the motherboard by gently pulling out on the black part of the cable closest to the white tab.
Step 7
• Remove the battery.

Author

with 5 other contributors

Natalie

Member since: 01/22/15

937 Reputation

4 Guides authored

Badges: 20

• 
• 
• 

+17 more badges

Team

Cal Poly, Team 19-9, Maness Winter 2015 Member of Cal Poly, Team 19-9, Maness Winter 2015

CPSU-MANESS-W15S19G9

4 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview