Fix Your Stuff Community Store

HP Omni 10 Speaker Replacement

Introduction

Using a spudger and a 00 Phillips head screwdriver, this guide will show how to remove a pair of speakers from an HP Omni 10 tablet in roughly 5 to 7 minutes.

What you need

  1. HP Omni 10 Speaker Replacement, Battery: step 1, image 1 of 1

    • Remove the back cover from the tablet.

    • The cover is securely fastened to the device and may be difficult to remove.

  2. HP Omni 10 Speaker Replacement: step 2, image 1 of 1

    • Push the black plastic security flaps into an upward position.

    • Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.

    • Lift the tab on the strip up and pull it across the battery.

    • The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

  3. HP Omni 10 Speaker Replacement: step 3, image 1 of 1

    • Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip's head screwdriver.

  4. HP Omni 10 Speaker Replacement: step 4, image 1 of 2 HP Omni 10 Speaker Replacement: step 4, image 2 of 2

    • Unhook the cord from the edge of the battery.

    • Pull the wire circuit out and down.

  6. HP Omni 10 Speaker Replacement: step 5, image 1 of 2 HP Omni 10 Speaker Replacement: step 5, image 2 of 2

    • Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

  7. HP Omni 10 Speaker Replacement, Micro Card Reader: step 6, image 1 of 1

    • Unscrew the two 3.3 mm screws using a 00 Phillip's head screwdriver.

  8. HP Omni 10 Speaker Replacement: step 7, image 1 of 1

    • Lift and remove micro card reader board.

  9. HP Omni 10 Speaker Replacement, Speaker: step 8, image 1 of 1

    • Unscrew the four 3.3 mm screws using a 00 Phillip's head screwdriver.

  10. HP Omni 10 Speaker Replacement: step 9, image 1 of 2 HP Omni 10 Speaker Replacement: step 9, image 2 of 2

    • Pull the black and white wire connector up to disconnect it.

  11. HP Omni 10 Speaker Replacement: step 10, image 1 of 2 HP Omni 10 Speaker Replacement: step 10, image 2 of 2

    • Pull the red and black wire connector up to disconnect it.

  12. HP Omni 10 Speaker Replacement: step 11, image 1 of 1

    • Lift the speaker set out of their sockets.

    • The speakers will also be attached via adhesive. They may be difficult to remove by hand.

  13. HP Omni 10 Speaker Replacement: step 12, image 1 of 1

    • Unhook the left speaker's connector wire to fully remove it from the device.

Author

with 1 other contributor

Alex Miller

Member since: 10/11/16

345 Reputation

5 Guides authored

Badges: 11

+8 more badges

Team

USF Tampa, Team 1-1, Leahy Fall 2016 Member of USF Tampa, Team 1-1, Leahy Fall 2016

USFT-LEAHY-F16S1G1

3 Members

10 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 12

All Time: 583