HP Officejet Pro 8625 Display Motherboard Replacement

Step 1 Display Motherboard



• Disconnect the display by holding it in place while pulling down on the plastic hinge.
• Slowly apply more and more force as it does take a lot to separate, do not worry about the hinge or display breaking.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2




• Lift the display as high as it will allow to expose the back of the display.
• Pinch the sides of the cover and pull away from the printer to reveal the connector.
• Remove the connector by pulling both away from the display and towards the printer.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Remove the four 6.2 mm T9 screws from the back of the display.
• Pull the display assembly up and away from the printer.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Remove the back cover from the display assembly by pressing down on the point of connection.
• If you use a plastic spudger for this step, be careful not to brake the plastic as you do not need to use much force to remove the back cover.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Remove the four 4.8 mm T6 screws from the back of the display motherboard.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Remove the connection on the front of the display motherboard.
• Remove the display motherboard.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Author

with 3 other contributors

Daniel

Member since: 10/08/18

283 Reputation

2 Guides authored

Badges: 9

• 
• 
• 

+6 more badges

Team

Cal Poly, Team S13-G3, White Fall 2018 Member of Cal Poly, Team S13-G3, White Fall 2018

CPSU-WHITE-F18S13G3

3 Members

14 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview