Fix Your Stuff Community Store

HP Officejet Pro 6835 Cover Disassembly

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

This guide will teach you how to remove the Cover on your HP Officejet Pro 6835 or 6830 to reach the main components.

What you need

  1. HP Officejet Pro 6835 Cover Disassembly, HP Officejet Pro 6835 Cover Disassembly: step 1, image 1 of 1

    • Open the main lid as far as it will go.

    • Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.

    • Open the lid further.

    Edit

  2. HP Officejet Pro 6835 Cover Disassembly: step 2, image 1 of 3 HP Officejet Pro 6835 Cover Disassembly: step 2, image 2 of 3 HP Officejet Pro 6835 Cover Disassembly: step 2, image 3 of 3

    • Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise.

    • The two screws above the screen assembly are deep so you may need a long screwdriver.

    Edit

  4. HP Officejet Pro 6835 Cover Disassembly: step 3, image 1 of 1

    • Grab the main cover and lift it up slightly.

    • Do not pull too hard—there is a cable connecting the cover to the printer.

    Edit

  5. HP Officejet Pro 6835 Cover Disassembly: step 4, image 1 of 2 HP Officejet Pro 6835 Cover Disassembly: step 4, image 2 of 2

    • Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Jake Park

Member since: 01/24/18

465 Reputation

2 Guides authored

Badges: 9

+6 more badges

Team

Cal Poly, Team S2-G4, Livingston Winter 2018 Member of Cal Poly, Team S2-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G4

4 Members

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 65