Fix Your Stuff Community Store

HP Mini 1000 Camera Board Cable Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

This guide is an internal prereq only.

What you need

  1. HP Mini 1000 Camera Board Cable Replacement, Camera Board Cable: step 1, image 1 of 1

    • Use the sharp end of a spudger to flip up the plastic flap that rests on top of the camera board cable ZIF socket.

  3. HP Mini 1000 Camera Board Cable Replacement: step 2, image 1 of 2 HP Mini 1000 Camera Board Cable Replacement: step 2, image 2 of 2

    • Use your fingernail or the sharp end of a spudger to flip up the retaining flap on the camera board cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

    • Pull the camera board ribbon cable out of its socket.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 22