Introduction

A brief guide on how to remove the hard drive from an HP G62-340.

Parts

No parts required.

  1. Turn off the computer and disconnect the charging cable from the computer.
    • Turn off the computer and disconnect the charging cable from the computer.

    • Turn your laptop over and locate the hard drive module compartment.

  2. Use a screwdriver to loosen the two Phillips PM2.5x6.0 captive screws on the hard drive cover.
    • Use a screwdriver to loosen the two Phillips PM2.5x6.0 captive screws on the hard drive cover.

    • Lift the left side of the hard drive cover and remove the cover.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive. Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive. Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive.
    • Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive.

  5. Disconnect the hard drive cable from the system board and gently remove the hard drive.
    • Disconnect the hard drive cable from the system board and gently remove the hard drive.

  6. Remove the 4 screws from the hard drive bracket and separate it from the hard drive. Remove the 4 screws from the hard drive bracket and separate it from the hard drive. Remove the 4 screws from the hard drive bracket and separate it from the hard drive.
    • Remove the 4 screws from the hard drive bracket and separate it from the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Yun Yang

Member since: 10/19/2017

321 Reputation

3 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 146