HP G60T-600 CTO RAM Replacement

Step 1 Battery

• Failure to remove the battery before performing any replacement guide may result in electric shock.
• Close your device, then turn it over.
Step 2



• Place your index finger on the ridged tab.
Step 3
• Apply moderate pressure to the tab and slide it to the right.
• While the tab is on the right, you should be able to gently slide your battery out of your device.
Step 4 RAM
• Turn your device over and orient it so the battery is facing you.
Step 5
• Unscrew the following 5mm screws using a Phillips head #0 screwdriver.
• Remove the cover.
Step 6
• Place your fingers on little metals tabs on both sides of the RAM casing.
• Push the tabs towards the sides. This should cause the RAM to pop up.
Step 7
• Pull on it with medium force at the angle it is oriented.

Author

with 2 other contributors

Dominic DeSantis

Member since: 10/19/16

748 Reputation

6 Guides authored

Badges: 13

• 
• 
• 

+10 more badges

Team

UMass Dartmouth, Team 4-5, Catania Fall 2016 Member of UMass Dartmouth, Team 4-5, Catania Fall 2016

UMASSD-CATANIA-F16S4G5

3 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview