Introduction
Use this guide to replace a faulty service cover on your HP Envy dv7t-7200 if the back cover has been broken, damaged, or will not stay on any longer.
What you need
-
-
Place the computer on its top on a flat surface with the hinges facing away from you.
-
-
-
-
Using a Phillips #01 screwdriver, remove the Phillips PM2.5×5.5 screw on the service cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.