Introduction

My computer is heating up! Is it catching a fever? What can I do to keep it at its normal temperature? Replacing the fan should not be too difficult.

Use your hands to unclip the plastic snaps on the back panel of the device.
  • Use your hands to unclip the plastic snaps on the back panel of the device.

Add Comment

Remove the three 11.5mm PH2 screws from the back panel.
  • Remove the three 11.5mm PH2 screws from the back panel.

  • The screws will not fall out of the back panel, but they will unscrew to release the back panel.

Add Comment

Now, take the back panel off by pulling at it gently with your hands.
  • Now, take the back panel off by pulling at it gently with your hands.

Add Comment

Remove the five 7.5mm T15 screws from the cover plate. Remove the cover plate.
  • Remove the five 7.5mm T15 screws from the cover plate.

  • Remove the cover plate.

Add Comment

Use your hands to separate the fan's wired connection to the motherboard. Use your hands to gently pull the plastic piece at the ends of the wires. Be gentle when you separate wired connections. Pulling on the wires can damage them.
  • Use your hands to separate the fan's wired connection to the motherboard. Use your hands to gently pull the plastic piece at the ends of the wires.

  • Be gentle when you separate wired connections. Pulling on the wires can damage them.

Add Comment

Remove the three 8mm T15 screws from the fan.
  • Remove the three 8mm T15 screws from the fan.

Add Comment

Pull the fan loose from the computer.
  • Pull the fan loose from the computer.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zachary Dicks

Member since: 10/01/2015

956 Reputation

7 Guides authored

Team

Cal Poly, Team 5-10, Maness Fall 2015 Member of Cal Poly, Team 5-10, Maness Fall 2015

CPSU-MANESS-F15S5G10

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 18

All Time: 382