Parts

No parts required.

Use your hands to unclip the plastic snaps on the back panel of the device.
  • Use your hands to unclip the plastic snaps on the back panel of the device.

Add Comment

Remove the three 11.5mm PH2 screws from the back panel.
  • Remove the three 11.5mm PH2 screws from the back panel.

  • The screws will not fall out of the back panel, but they will unscrew to release the back panel.

Add Comment

Now, take the back panel off by pulling at it gently with your hands.
  • Now, take the back panel off by pulling at it gently with your hands.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Zachary Dicks

Member since: 10/01/2015

953 Reputation

7 Guides authored

Team

Cal Poly, Team 5-10, Maness Fall 2015 Member of Cal Poly, Team 5-10, Maness Fall 2015

CPSU-MANESS-F15S5G10

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 22

All Time: 554