Skip to main content

HP Deskjet 1000 J110a Parts Replacement

What you need

  1. HP Deskjet 1000 J110a  Parts Replacement, Cover Removal: step 1, image 1 of 3 HP Deskjet 1000 J110a  Parts Replacement, Cover Removal: step 1, image 2 of 3 HP Deskjet 1000 J110a  Parts Replacement, Cover Removal: step 1, image 3 of 3
    • Remove the two 13 mm screws located on the back of the printer using a screwdriver with the T10 torx bit (star-shaped).

  2. HP Deskjet 1000 J110a  Parts Replacement: step 2, image 1 of 3 HP Deskjet 1000 J110a  Parts Replacement: step 2, image 2 of 3 HP Deskjet 1000 J110a  Parts Replacement: step 2, image 3 of 3
    • In the front of the printer, open the tray where the paper comes out and remove the two 13 mm screws located under the top of the printer.

  3. HP Deskjet 1000 J110a  Parts Replacement: step 3, image 1 of 1
    • With the front of the printer facing you, lift and raise the left side of the panel (like opening a book in reverse) until it disconnects from the clip on the right side of the panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Colin Tourjee

Member since: 01/29/18

632 Reputation

4 Guides authored

Team

USF Tampa, Team S5-G3, Passmore Spring 2018 Member of USF Tampa, Team S5-G3, Passmore Spring 2018

USFT-PASSMORE-S18S5G3

4 Members

12 Guides authored

2 Comments

Very intuitive, good instructions. Highly recommended.

Krzysztof Białkowski - Reply

Thank you very much for the instructions on removing the cover to the HP 1200 Deskjet. It allowed me to removed a part that fell into the printer and prevented the paper from advancing.

karenliller@comcast.net - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 11

All Time: 925