GoPro Hero3+ Black Edition Front Face Plate Replacement - iFixit Repair Guide

Introduction

If you don't like the cracked look of your GoPro faceplate, it may be time to give it a makeover. See how to replace it in under a minute!

What you need

Step 1 Front Face Plate

GoPro Hero3+ Black Edition Front Face Plate Replacement, Front Face Plate: step 1, image 1 of 2

GoPro Hero3+ Black Edition Front Face Plate Replacement, Front Face Plate: step 1, image 2 of 2

Using a plastic opening tool, pry the gray, front face plate until it can be removed from the housing.
To avoid breaking or weakening the tabs on the face plate which hold it in place, alternate the sides from which you pry and check each tab before separating the plate from the body.

Conclusion

To reassemble your device, press face plate back on with hands.

One other person completed this guide.

Author

with 5 other contributors

Nathan Braham

Member since: 04/14/15

110 Reputation

1 Guide authored

Team

Cal Poly, Team 6-15, Maness Spring 2015 Member of Cal Poly, Team 6-15, Maness Spring 2015

CPSU-MANESS-S15S6G15

4 Members

13 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 1,647