Skip to main content

Introduction

Use this guide to replace the 9 Volt battery that powers the base

  1. Unplug the device before proceeding. Using a plastic opening tool, remove the phone cord from the phone jack from the base of the headset.
    • Unplug the device before proceeding.

    • Using a plastic opening tool, remove the phone cord from the phone jack from the base of the headset.

  2. Remove the phone cord screw cap. Unscrew the 7.5mm screw. Remove the screw cap.
    • Remove the phone cord screw cap.

    • Unscrew the 7.5mm screw.

    • Remove the screw cap.

    • Remove the cord from the phone base.

  3. Use finger to remove the battery cover. Use finger to remove the battery cover.
    • Use finger to remove the battery cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Norberto Sanchez

Member since: 09/26/2012

70 Reputation

5 Guides authored

Team

Cal Poly, Team 16-59, Forte Fall 2012 Member of Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 592