Introduction
Repair the damper assembly door rather than replacing the entire assembly.
What you need
Video Overview
-
-
This video is about repairing a broken damper doo rather than replacing the regulator assembly.
-
-
-
-
Empty Fridge, remove the regulator at the top rear of the fridge, check and see if its a broken damper door. assuming it is remove the damper motor assembly with the broken door and use a heat gun to weld them back together. adjust the assembly as needed and replace the damper assembly and test.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
