Introduction

This guide will serve as a prerequisite for further guides to ensure workbench safety for the Garmin nüvi 3590 LMT.

WARNING: Use caution when dealing with batteries and dispose of properly. DO NOT PUNCTURE.

Image 1/1:
  • Turn the device off by pressing and holding the power button on the top left of the device.

Add Comment

Image 1/1:
  • Use the plastic opening tool to separate the tabs on the black back cover of the device by leveraging the tool against the frame around the perimeter of the device.

Add Comment

Image 1/1: The back cover is a separate piece from the device.
  • Once all of the tabs are popped out, take the back cover off.

  • The back cover is a separate piece from the device.

Add Comment

Image 1/2: Image 2/2:
  • Using the plastic spudger, carefully remove the white tab connected to the battery from the device by pulling the tab in the opposite direction from which it is connected.

Add Comment

Image 1/3: Do not puncture or bend the battery. Serious health complications could occur. Image 2/3: Do not puncture or bend the battery. Serious health complications could occur. Image 3/3: Do not puncture or bend the battery. Serious health complications could occur.
  • Use the plastic spudger to lift the battery up and away from the device.

  • Do not puncture or bend the battery. Serious health complications could occur.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

David

Member since: 03/11/2015

355 Reputation

3 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 14

Past 30 Days: 55

All Time: 1,173