Introduction

Before replacing the speaker, visit this device's Troubleshooting Page to determine whether you need to replace the speaker. Follow the steps in this guide if you need to replace the speaker.

Image 1/3: Image 2/3: Image 3/3:
  • Remove the four screws on the back of the GPS using the T5 Torx screwdriver.

Add Comment

Image 1/3: When prying open the device, use caution to avoid damaging the motherboard. Image 2/3: When prying open the device, use caution to avoid damaging the motherboard. Image 3/3: When prying open the device, use caution to avoid damaging the motherboard.
  • Pry the GPS open using a plastic opening tool.

  • When prying open the device, use caution to avoid damaging the motherboard.

Add Comment

Image 1/2: Be gentle, the speakers are connected to the motherboard by blue and black wire. Image 2/2: Be gentle, the speakers are connected to the motherboard by blue and black wire.
  • Use the plastic opening tool to pry the speaker away from the device.

  • Be gentle, the speakers are connected to the motherboard by blue and black wire.

Add Comment

Image 1/1: Check out this awesome guide on [https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750|how to solder and desolder connections.]

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 40