Parts

No parts required.

  1. Place the device on the workspace so the screen is facing downward.
    • Place the device on the workspace so the screen is facing downward.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Using the t5 screwdriver from the iFixit Pro Tool Kit, remove all four 5.6mm screws placing them safely on the table.
    • Using the t5 screwdriver from the iFixit Pro Tool Kit, remove all four 5.6mm screws placing them safely on the table.

    Add Comment

    • Grab a spudger from tool kit.

    • Pry open sides of Nuvi gently with spudger (do not rip apart).

    • Use plastic opening tool to pry ribbon slowly from white plastic bar.

    • Separate the two pieces and place them on the table

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 10

All Time: 453