Fix Your Stuff Community Store

Garmin Nuvi 2589LMT Back Panel Assembly Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prerequisite Only

What you need

  1. Garmin Nuvi 2589LMT Back Panel Assembly Replacement, Back Panel Assembly: step 1, image 1 of 1

    • Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

    Edit

  3. Garmin Nuvi 2589LMT Back Panel Assembly Replacement: step 2, image 1 of 2 Garmin Nuvi 2589LMT Back Panel Assembly Replacement: step 2, image 2 of 2

    • Using the plastic opening tools, pry the shorter sides of the device apart.

    • Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

    • Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Adam Ferraro

Member since: 10/04/16

920 Reputation

8 Guides authored

Badges: 12

+9 more badges

Team

USF Tampa, Team 1-2, Nance Fall 2016 Member of USF Tampa, Team 1-2, Nance Fall 2016

USFT-NANCE-F16S1G2

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 30