Introduction

The Garmin Nuvi 2455LMT is an easy device to open and access. The only small parts to be aware of are the four 2.5mm Torx #04 screws on the back panel assembly. Opening up the GPS will only take 5-10 minutes and requires a plastic opening tool and the Torx 4 screwdriver.

Remove the four 2.5mm screws  from the back assembly with a Torx #04 Screwdriver.
  • Remove the four 2.5mm screws from the back assembly with a Torx #04 Screwdriver.

  • Holding the GPS with a free hand while unscrewing the small screws will help stabilize the device.

Add Comment

Use the plastic opening tool on all four sides of the device to open the Garmin Nuvi LMT2455 Back Panel. To properly remove the back cover assembly pry open both the back and sides of the assembly.
  • Use the plastic opening tool on all four sides of the device to open the Garmin Nuvi LMT2455 Back Panel.

  • To properly remove the back cover assembly pry open both the back and sides of the assembly.

Add Comment

Open the device carefully being wary of the orange band that is going from the screen to the motherboard. Remove the orange band by carefully lifting the lip that connects it to the motherboard. Remove the orange band by carefully lifting the lip that connects it to the motherboard.
  • Open the device carefully being wary of the orange band that is going from the screen to the motherboard.

  • Remove the orange band by carefully lifting the lip that connects it to the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Nathaniel Williams

Member since: 09/19/2016

228 Reputation

2 Guides authored

Team

USF Tampa, Team 2-3, Blackwell Fall 2016 Member of USF Tampa, Team 2-3, Blackwell Fall 2016

USFT-BLACKWELL-F16S2G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 7

All Time: 117