Garmin Dash Cam 20 Internal Assembly

Introduction

This guide will walk users through removing the top cover of the Garmin Dash Cam as well as the metal battery frame. Due to the compact nature of this device, this guide is a prerequisite to other guides that require access to the internal components of the device.

What you need

Step 1 Internal Assembly

Garmin Dash Cam 20 Internal Assembly, Internal Assembly: step 1, image 1 of 2

Garmin Dash Cam 20 Internal Assembly, Internal Assembly: step 1, image 2 of 2

Be sure to turn off the Dash Cam by pressing the power button.

Edit

Step 2

Rotate the Dash Cam to where the socket faces you.
Remove the 9 mm screw using the Torx T6 screwdriver.

Edit

Step 3

Remove the Dash Cam socket piece.

Edit

Step 4

Rotate the Dash Cam to where the product information faces you.
Remove the two 5 mm screws using the Torx T5 screwdriver.

Edit

Step 5

Garmin Dash Cam 20 Internal Assembly: step 5, image 3 of 3

Remove top case from the bottom case.
The compact nature of the casing requires use of the metal spudger for needed leverage.

Edit

Step 6

Garmin Dash Cam 20 Internal Assembly: step 6, image 3 of 3

Remove the two 5mm screws using the Torx T5 screwdriver
By removing the screws, the metal battery frame will now become free from the rest of the device.

Edit