What you need
-
-
Use a the end of a flat screwdriver, lever out the cover and put it aside.
-
-
-
-
Insert a small flat end screw driver into the notch of the central axis.
-
Tightly hold in place the screwdriver with one hand and spin the plate with the other. The bolt is held in the plastic plate and will unscrew with it.
-
To reassemble your device, follow the instructions in reverse order.
To reassemble your device, follow the instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›