Fix Your Stuff Community Store

Furby "Feet" Cleaning Guide

Introduction

This guide doesn't require you to remove the back panel. The parts in the base are relatively small so we suggest having a way to keep track of them. Cleaning is at your discretion although we recommend a mild detergent/dish soap.

What you need

  1. Furby "Feet" Cleaning Guide, Furby "Feet" Cleaning Guide: step 1, image 1 of 3 Furby "Feet" Cleaning Guide, Furby "Feet" Cleaning Guide: step 1, image 2 of 3 Furby "Feet" Cleaning Guide, Furby "Feet" Cleaning Guide: step 1, image 3 of 3

    • Flip Furby upside down so his feet are pointed towards you.

    • Unscrew the right and left screws on the base.

    Edit

  2. Furby "Feet" Cleaning Guide: step 2, image 1 of 3 Furby "Feet" Cleaning Guide: step 2, image 2 of 3 Furby "Feet" Cleaning Guide: step 2, image 3 of 3

    • Remove the base from your Furby.

    • Flip over the base so the screws are on the right and left.

    • Unscrew the 2 right and 2 left inside screws.

    Edit

  4. Furby "Feet" Cleaning Guide: step 3, image 1 of 3 Furby "Feet" Cleaning Guide: step 3, image 2 of 3 Furby "Feet" Cleaning Guide: step 3, image 3 of 3

    • Lift the housing for the foot components.

    • Rotate the base 90 degrees.

    • Locate all four of the foot activation levers. Remove them one by one from the base.

    Edit

  5. Furby "Feet" Cleaning Guide: step 4, image 1 of 2 Furby "Feet" Cleaning Guide: step 4, image 2 of 2

    • Locate the feet pieces and remove them.

    Edit

  6. Furby "Feet" Cleaning Guide: step 5, image 1 of 3 Furby "Feet" Cleaning Guide: step 5, image 2 of 3 Furby "Feet" Cleaning Guide: step 5, image 3 of 3

    • Locate and gently lift out the four small springs using tweezers.

    • Now that you have all parts are removed, they can be cleaned and reassembled into Furby's "feet".

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Miles Drazkowski

Member since: 10/06/16

476 Reputation

1 Guide authored

Badges: 13

+10 more badges

Team

Cal Poly, Team 15-5, Livingston Fall 2016 Member of Cal Poly, Team 15-5, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G5

4 Members

9 Guides authored

One Comment

I greet my furby boom 2012 he falls asleep and when I wake him up he starts to cry and then he falls asleep. This started after a week without using.What I can do,Thanks for your help.Juan

jrrabrito - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 15

All Time: 1,408