Skip to main content

Fujifilm FinePix XP80 Exterior Case Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Fujifilm FinePix XP80 Exterior Case Replacement, Exterior Case: step 1, image 1 of 1
    • Using a Phillips PH000 bit, remove the five 2mm screws on the bottom of the camera.

  2. Fujifilm FinePix XP80 Exterior Case Replacement: step 2, image 1 of 1
    • Using a H1.3 hex head bit, remove the two 2mm screws from the top of the camera.

  3. Fujifilm FinePix XP80 Exterior Case Replacement: step 3, image 1 of 1
    • Using a H1.3 hex head bit, remove the two 2mm screws on the side of the camera.

  4. Fujifilm FinePix XP80 Exterior Case Replacement: step 4, image 1 of 1
    • Using a plastic opening tool, gently pry up the edge of the button case, located at the top of the camera, until it unclips.

  5. Fujifilm FinePix XP80 Exterior Case Replacement: step 5, image 1 of 1
    • Gently pry the side area of the case apart.

  6. Fujifilm FinePix XP80 Exterior Case Replacement: step 6, image 1 of 1
    • Continue using the opening tool on the bottom of the camera to gently pry the case apart.

  7. Fujifilm FinePix XP80 Exterior Case Replacement: step 7, image 1 of 2 Fujifilm FinePix XP80 Exterior Case Replacement: step 7, image 2 of 2
    • Use the plastic opening tool to carefully pry the yellow front panel completely away from the camera.

    • Use your hands to take off the yellow back panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Busra Atalay

Member since: 09/29/16

49 Reputation

2 Guides authored

Team

USF Tampa, Team 1-3, Cagle Fall 2016 Member of USF Tampa, Team 1-3, Cagle Fall 2016

USFT-CAGLE-F16S1G3

5 Members

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 62