Introduction

In this guide, we will outline how to properly unhinge the rubber seal profile and replace it after cleaning or with a new seal profile.

Open the drawer on the bottom side of the FoodSaver first.
  • Open the drawer on the bottom side of the FoodSaver first.

Add Comment

Deck the Halls
With tools and Fix Kits
Gently pull the sides of the rubber seal profile with a finger and remove it from the device.
  • Gently pull the sides of the rubber seal profile with a finger and remove it from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Mackenzie Grossgold

Member since: 04/14/2016

775 Reputation

6 Guides authored

Team

Cal Poly, Team 34-17, Maness Spring 2016 Member of Cal Poly, Team 34-17, Maness Spring 2016

CPSU-MANESS-S16S34G17

4 Members

6 Guides authored

One Comment

Does anyone else have difficulty pulling the drip tray out? I’ve released the tabs on the bottom of the unit and tried pulling on the tray. I detect some movement but it won’t come out. If I pull any harder, I’ll probably break it.

Jerry - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 20

Past 30 Days: 99

All Time: 1,457