Fixing a non-reading SIM Card
Sisyphe and 2 other contributors
Last updated on Feb 5, 2023
Views: 5K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 24
- Past 30 Days:
- 87
- All Time:
- 4,979
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 16 17
16 people have favorited (and subscribed to) this guide. Will you be next?
17 people have favorited (and subscribed to) this guide — including you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓If you install the sim card in the sim drawer the iPad 2 and it says "no sim card installed", use this guide to repair an iPad 2 that does not recognize the SIM after installation.
What you need
Tools
-
-
-
-
-
Spudger4.9
-
-
-
In this case, check all traces as shown on picture with a volt/ohmmeter.
-
If some are broken make a shunt, as in the second picture to get the sim reader fully working.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
