Introduction

I am going to show you how to replace your watch battery and show you how to preserve the life of your new watch battery.

Image 1/2: Image 2/2:
  • For this project you will need the watch you are replacing the battery on, the new battery and a mini flat head screwdriver.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • You will need to take the back of the watch off. To do this you will turn the watch over to the back side and look carefully for a small groove opening. This is where you will use the mini flat head screwdriver. Insert the flat head screwdriver into the groove and pop the back off of the watch.

Add Comment

Image 1/2: Image 2/2:
  • Take the white plastic ring out of the watch. You can use the mini flat head screwdriver or your finger to pull it out.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Take the old battery out of the watch. You can use the mini flat head screwdriver to do this.

Add Comment

Image 1/1:
  • Put the new battery in watch. Use your fingers to insert the new battery.

Add Comment

Image 1/1:
  • Use your fingers to insert the plastic white ring back into the watch.

Add Comment

Image 1/1:
  • Put the back of the watch on using your fingers. Press down so that you hear a snap to ensure the back is on properly.

Add Comment

Image 1/1:
  • You are all done and can now set the time on your watch.

Add Comment

Image 1/2: Image 2/2:
  • When you are not using the watch, pull the pin out to stop the watch from running

Add Comment

Image 1/1:
  • When the pin is pulled out, the battery is not being used. Only push the pin in and set the time when you are using the watch. This will preserve the life of your new battery.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

TIMONTE HUNTER

Member since: 03/02/2016

121 Reputation

1 Guide authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 22

Past 7 Days: 92

Past 30 Days: 347

All Time: 1,264