Introduction

This guide walks you through removing the exhaust and dust cup filters in the Eureka SuctionSeal 2.0 Pet vacuum. Refer to this guide if you notice a bad smell coming from your vacuum or you are experiencing poor suction.

Tools

No tools required.

Parts

No parts required.

Place the device upright with the brush roller closest to you. Pull up on the latch at the top of the dust cup.
  • Place the device upright with the brush roller closest to you.

  • Pull up on the latch at the top of the dust cup.

  • Tilt the top of the dust cup forward and pull towards yourself, removing the container from the device.

Add Comment

Locate the gray exhaust filter cover at the top of the vacuum's base. Grip the two tabs in the middle of the filter cover and rotate it counter-clockwise.
  • Locate the gray exhaust filter cover at the top of the vacuum's base.

  • Grip the two tabs in the middle of the filter cover and rotate it counter-clockwise.

  • Lift the cover away from the vacuum.

Add Comment

Grab the tab on the exhaust filter.
  • Grab the tab on the exhaust filter.

  • Lift the filter straight up from the vacuum's base.

Add Comment

Locate the lid at the top of the previously removed dust cup. Lift the latch and lay the cover back.
  • Locate the lid at the top of the previously removed dust cup.

  • Lift the latch and lay the cover back.

Add Comment

Pull up on the tag and remove the filter. Pull up on the tag and remove the filter.
  • Pull up on the tag and remove the filter.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Anna Snyder

Member since: 10/02/2017

303 Reputation

3 Guides authored

Team

Cal Poly, Team S4-G5, Livingston Fall 2017 Member of Cal Poly, Team S4-G5, Livingston Fall 2017

CPSU-LIVINGSTON-F17S4G5

3 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 4

All Time: 75