Skip to main content

Introduction

If you determine that your vacuum is no longer picking up debris or it has been six months since the last HEPA filter replacement, this guide will help you to replace the filter to increase the suction.

  1. Press the grey dust cup release button and gently pull the dust cup towards you. Press the grey dust cup release button and gently pull the dust cup towards you.
    • Press the grey dust cup release button and gently pull the dust cup towards you.

  2. Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases. Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases. Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases.
    • Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases.

  3. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  4. Pull the grey handle on the HEPA filter to remove the used HEPA filter.
    • Pull the grey handle on the HEPA filter to remove the used HEPA filter.

  5. Place new HEPA filter into holder.
    • Place new HEPA filter into holder.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Celina Burchett

Member since: 10/13/2014

1,101 Reputation

8 Guides authored

Team

Clemson, Team 2-2, Benson Fall 2014 Member of Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 12

Past 30 Days: 27

All Time: 1,158