What you need
-
-
Press and hold down the black button below the handle while pulling the pole out.
-
-
-
-
Use a #2 Phillips head screwdriver to remove six 13.9mm screws from the side of the motor housing (top half) as shown.
-
Remove two 14.1mm screws from the front face of the housing. You are now all set to open the housing.
-
-
-
Once the housing is open, locate the solid chrome plated piece at the front end of the extendable pole.
-
-
-
On the side of the motor housing which does not hold the engine, find the center track which runs along the inside of the housing.
-
Re-insert the chrome plated piece into the center track.
-