Skip to main content

Introduction

Your vacuum's dust cup will fill up after prolonged use. For maximum vacuuming efficiency, replace your dust cup using this simple guide.

  1. Press the black separator switch and lightly pull the bottom half away from the top. Unscrew the screws shown in the picture.
    • Press the black separator switch and lightly pull the bottom half away from the top.

    • Unscrew the screws shown in the picture.

  2. You can now see the dust cup in the bottom half of your vacuum.
    • You can now see the dust cup in the bottom half of your vacuum.

  3. Lift the dust cup up and out to remove it.
    • Lift the dust cup up and out to remove it.

  4. Slot the new dust cup back into the cavity.
    • Slot the new dust cup back into the cavity.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nikhila Vijaybhaskar

Member since: 09/24/2013

224 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 343