Etekcity Lasergrip 1080 Button Replacement

You're viewing a previously published version of this guide. View latest version

Oct 05, 2017 - 11:36:17

Oct 05, 2017 - 02:23:27 Oct 05, 2017 - 11:36:17 Oct 05, 2017 - 11:30:52 Oct 05, 2017 - 11:21:20 Oct 05, 2017 - 11:12:36 Oct 05, 2017 - 11:10:47 Sep 28, 2017 - 11:25:22 Sep 28, 2017 - 11:24:58 Sep 28, 2017 - 11:20:07 Sep 28, 2017 - 11:18:07 Sep 28, 2017 - 11:16:59 Sep 27, 2017 - 09:35:27 Feb 19, 2016 - 01:42:36 Nov 04, 2015 - 03:18:31 Nov 04, 2015 - 03:18:26 Nov 04, 2015 - 03:16:47 Nov 04, 2015 - 03:15:55 Oct 18, 2015 - 12:48:09 Oct 18, 2015 - 12:48:00 Oct 18, 2015 - 12:47:53 Oct 18, 2015 - 12:47:42 Oct 18, 2015 - 12:47:32 Oct 18, 2015 - 11:59:47 Oct 15, 2015 - 05:09:19 Oct 15, 2015 - 05:06:03 Oct 13, 2015 - 06:13:54 Oct 13, 2015 - 06:13:18 Oct 13, 2015 - 06:10:52 Oct 13, 2015 - 06:03:48 Oct 13, 2015 - 05:44:29 Oct 13, 2015 - 05:40:02 Oct 13, 2015 - 04:41:11 Oct 13, 2015 - 03:10:11 Oct 13, 2015 - 02:56:41 Oct 13, 2015 - 02:51:19 Oct 13, 2015 - 02:49:44 Oct 13, 2015 - 02:48:42 Oct 13, 2015 - 02:47:09 Oct 13, 2015 - 02:46:33 Oct 13, 2015 - 02:45:14 Oct 13, 2015 - 02:29:47 Oct 13, 2015 - 02:18:34 Oct 08, 2015 - 05:45:22 Oct 08, 2015 - 05:43:10 Oct 08, 2015 - 05:42:07 Oct 08, 2015 - 05:41:37 Oct 08, 2015 - 05:40:43 Oct 08, 2015 - 05:39:42 Oct 08, 2015 - 05:37:27 Oct 08, 2015 - 05:36:05 Oct 08, 2015 - 05:32:59 Oct 08, 2015 - 05:31:41 Oct 08, 2015 - 05:30:25 Oct 08, 2015 - 05:26:57 Oct 08, 2015 - 05:25:36 Oct 08, 2015 - 05:22:36 Oct 06, 2015 - 06:03:01

Newer

Introduction

This guide will teach you how to replace buttons that are not functioning properly. This will use a screwdriver and a plastic opening tool. There are no hazards involved.

What you need

Step 1 Battery

Etekcity Lasergrip 1080 Button Replacement, Battery: step 1, image 1 of 1

Pull the battery cover away from the handle by gripping near the thumb groove.

Step 2

Gently pull the battery out of the handle.
Excessive force could damage wires.

Step 3

Disconnect the battery by pulling the connector away from it.
Positive first
Negative second
When replacing the battery, this order is reversed.

Step 4 Buttons

Etekcity Lasergrip 1080 Button Replacement, Buttons: step 4, image 1 of 2

Etekcity Lasergrip 1080 Button Replacement, Buttons: step 4, image 2 of 2

Remove the battery cover from the device by pulling it straight out.

Step 5

Using the plastic opening tool remove the front and rear yellow covers.
When removing the back cover, be careful not to lose the buttons as they are not connected.