Fix Your Stuff Community Store

Ecovacs Deebot 900 Battery Replacement

Introduction

Use this guide to replace the battery in your Ecovacs Deebot 900 if it is malfunctioning or will not maintain a charge. The battery allows the Deebot 900 to maintain power without being plugged into a power source. It may become necessary to replace a malfunctioning battery.

Removing the battery when repairing anything inside the robot is also recommended for safety.

What you need

  1. Ecovacs Deebot 900 Battery Replacement, Battery: step 1, image 1 of 1

    • Remove all the brushes from the Deebot.

    Edit

  2. Ecovacs Deebot 900 Battery Replacement: step 2, image 1 of 1

    • Using a Phillips #0 screwdriver, remove the two 12.25 mm screws holding the battery cover in place.​

    Edit

  4. Ecovacs Deebot 900 Battery Replacement: step 3, image 1 of 1

    • Remove the battery cover.

    Edit

  5. Ecovacs Deebot 900 Battery Replacement: step 4, image 1 of 1

    • Using the two white straps on the sides of the battery, gently remove the battery. ​

    • Be careful not to rip out the battery cable.

    Edit

  6. Ecovacs Deebot 900 Battery Replacement: step 5, image 1 of 1

    • Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

5 Comments

Great guide except no information on where to actually FIND a battery for this thing

Chris Staley - Reply

Where can replacement battery packs be acquired from?

Larry Smith - Reply

You can find the battery at Taobao online shopping

Jimmy - Reply

Amazon also sells them. Make sure to get one for the correct model though (there are alot of them)

Kevin Dunn - Reply

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 87

Past 30 Days: 440

All Time: 22,069