Introduction

In the case of a smelly device or loss of suction, a filter cleaning or replacement may help to maintain the Dyson V8 Absolute. It is important that the filters are cleaned frequently, at least once a month. The device contains a pre-filter and the HEPA filter. The HEPA filter, is filtering post cycled air through the device. The pre-filter is the initial filtering of debris suctioned.

  1. First, make sure the device is unplugged.
    • First, make sure the device is unplugged.

    • Pull the pre-filter up by the knob.

  2. Twist the HEPA filter to the left, matching up two black dots on the device and pulling away.
    • Twist the HEPA filter to the left, matching up two black dots on the device and pulling away.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Miranda Laberge

Member since: 10/19/2017

328 Reputation

2 Guides authored

Team

UW Tacoma, Team S1-G5, Rose Fall 2017 Member of UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Members

7 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 12

Past 7 Days: 106

Past 30 Days: 492

All Time: 5,387