Introduction
If your Dyson motor is no longer functioning correctly, grab a pair of long tweezers and check out this guide to replace the main body,
What you need
Video Overview
-
-
-
Flip the vacuum over so that the silver cyclone part of the vacuum is now at the base.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
4 Comments
Has anyone replaced the red release catch?
The white C-ring with clips must be pushed down in order to reassemble device. Takes some time to practice.