Skip to main content

Dyson Cinetic Big Ball Animal Upright Hose Replacement

What you need

  1. Dyson Cinetic Big Ball Animal Upright Hose Replacement, Hose: step 1, image 1 of 2 Dyson Cinetic Big Ball Animal Upright Hose Replacement, Hose: step 1, image 2 of 2
    • Lift off the dust bin from the Dyson.

  2. Dyson Cinetic Big Ball Animal Upright Hose Replacement: step 2, image 1 of 1
    • Locate the removable hose on the back of the Dyson.

    • Pull up on the hose in order to remove the top half of the hose.

  3. Dyson Cinetic Big Ball Animal Upright Hose Replacement: step 3, image 1 of 1
    • Locate the red tab on the frontside of Dyson.

  4. Dyson Cinetic Big Ball Animal Upright Hose Replacement: step 4, image 1 of 3 Dyson Cinetic Big Ball Animal Upright Hose Replacement: step 4, image 2 of 3 Dyson Cinetic Big Ball Animal Upright Hose Replacement: step 4, image 3 of 3
    • Lift up the red tab with the screwdriver while simultaneously pulling on the back hose.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Karla Sunjara

Member since: 01/24/17

891 Reputation

5 Guides authored

Team

Cal Poly, Team S13-G1, Banghart Winter 2017 Member of Cal Poly, Team S13-G1, Banghart Winter 2017

CPSU-BANGHART-W17S13G1

3 Members

10 Guides authored

2 Comments

Following step 4, I tried to “lift” the red tab with my screwdriver. It did not budge. After enlarging the photo, I saw that the tab can be seen from both sides. Therefore, I tried “pushing” the red tab instead of “lifting” it, and it popped right off. “Lifting” and “pushing” are different actions.

vlkea01 - Reply

I've taken the small hose out (in the picture, it is in the center at the bottom of the balls) now I cannot get it back in - at one point I thought I had it snapped back in but it didn't stay - any ideas?

K BS - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 16

Past 30 Days: 64

All Time: 11,686