DualShock 3 Rear Cover Replacement

You're viewing a previously published version of this guide. View latest version

Sep 19, 2018 - 12:12:21

Sep 19, 2018 - 12:12:46 Sep 19, 2018 - 12:12:21 Dec 05, 2017 - 11:16:44 Dec 05, 2017 - 11:13:05 Dec 05, 2017 - 11:13:05 Nov 27, 2014 - 11:06:37 Jul 31, 2013 - 05:12:49 Jul 11, 2013 - 04:53:41 Dec 16, 2012 - 05:17:46 Jun 15, 2012 - 05:46:36 Jun 15, 2012 - 05:46:35 Jun 15, 2012 - 05:46:33 Jul 26, 2010 - 02:50:25 Jul 19, 2010 - 06:06:07 Jul 13, 2010 - 11:10:29 Jul 09, 2010 - 02:03:15 Jul 08, 2010 - 03:23:56 Jul 08, 2010 - 02:49:01 Jul 08, 2010 - 02:49:00 Jul 08, 2010 - 02:48:48 Jul 08, 2010 - 02:48:46 Jul 08, 2010 - 02:38:37 Jul 08, 2010 - 02:38:36 Jul 08, 2010 - 01:28:13 Jul 08, 2010 - 01:18:36

Newer

Introduction

Use this guide to remove the rear cover of a DualShock 3 controller.

What you need

Step 1 Rear Cover

DualShock 3 Rear Cover Replacement, Rear Cover: step 1, image 1 of 1

Remove the five 7.2 mm Phillips screws securing the rear cover to the controller.

Step 2

Press on the rear cover between the analog sticks and slightly lift the lower edge of it away from the rest of the controller.

Step 3

Push the rear cover slightly toward the top edge of the controller to clear the front edge of the #2 triggers.
Pull the rear cover away from the rest of the controller, being careful not to pop off the #2 triggers.
If you happen to accidentally pop off the trigger buttons, we have a trigger button guide to reattach them.