Introduction

Replace the speaker via soldering.

Position the tablet so the ports and screws are facing you.
  • Position the tablet so the ports and screws are facing you.

Add Comment

Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.
  • Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.

Add Comment

Use the plastic opening tool to assist in removing the back cover. Use the plastic opening tool to assist in removing the back cover.
  • Use the plastic opening tool to assist in removing the back cover.

Add Comment

Upon removing the back cover position the tablet as seen in the picture.
  • Upon removing the back cover position the tablet as seen in the picture.

Add Comment

Remove the speaker from the back cover. Remove the speaker from the back cover.
  • Remove the speaker from the back cover.

Add Comment

Remove the black and red wire from the Motherboard.
  • Remove the black and red wire from the Motherboard.

Add Comment

Install the new speaker by soldering the wires to the motherboard. For additional soldering instructions please view this page: How To Solder and Desolder Connections

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stacey Mattila

Member since: 03/18/2015

542 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 84