Skip to main content
  1. Open all 7 screws with a fitting philips screwdriver. Open all 7 screws with a fitting philips screwdriver. Open all 7 screws with a fitting philips screwdriver.
    • Open all 7 screws with a fitting philips screwdriver.

  2. The backbody is lose now, remove it carefully and it reveals the controls and the display
    • The backbody is lose now, remove it carefully and it reveals the controls and the display

  3. Remove the green board with the controls first.
    • Remove the green board with the controls first.

    • DON'T USE FORCE, it should get lose easily. Don't bend the cables too much.

    • Remove the cable from the control board

    • Lift the display off, don't bed the cable too much.

    • Open the connector of the cable carefully. Don't scratch the board and don't use too much force. Ideally, use a plastic spudger of the ifixit-kit

    • The display got removed, not just fit the new display in reveresed order.

Conclusion

Do the staps backwards to build the Camera together again.

One other person completed this guide.

Special thanks to these translators:

de en

85%

Johannes is helping us fix the world! Want to contribute?
Start translating ›

Johannes

Member since: 08/21/2017

367 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 15

All Time: 988