Introduction
To get inside the console, both housing parts need to be taken apart.
What you need
-
-
Remove the six 13.50mm PH2 screws from the base plate.
-
Now take off the upper part of the housing.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
de en
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
