Introduction

This guide will teach the user how to remove the back plate, which is necessary to access any of the internal components of the laptop.

Parts

No parts required.

Flip laptop over so that "Service TAG" is shown at the top left corner.
  • Flip laptop over so that "Service TAG" is shown at the top left corner.

Add Comment

Remove highlighted screws from back of laptop.
  • Remove highlighted screws from back of laptop.

Add Comment

Remove screws from panels at bottom right hand side.
  • Remove screws from panels at bottom right hand side.

Add Comment

Remove two panels at bottom right hand corner by sliding in direction of arrows shown
  • Remove two panels at bottom right hand corner by sliding in direction of arrows shown

Add Comment

Remove screws underneath removed panels.
  • Remove screws underneath removed panels.

Add Comment

Remove Hard drive from computer.
  • Remove Hard drive from computer.

Add Comment

Remove battery by pressing inwards on both tabs.
  • Remove battery by pressing inwards on both tabs.

Add Comment

Remove cover at top left of laptop by pulling outwards.
  • Remove cover at top left of laptop by pulling outwards.

Add Comment

Remove backplate of laptop by pulling outward.
  • Remove backplate of laptop by pulling outward.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

shamaz

Member since: 03/12/2014

125 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 253