Skip to main content

Disassembling Sprint Sanyo RL-4920 Outer Case

What you need

  1. Disassembling Sprint Sanyo RL-4920 Outer Case, Back of Phone: step 1, image 1 of 1
    • Flip the phone over so that the screen is facing down.

  2. Disassembling Sprint Sanyo RL-4920 Outer Case, Remove Battery Pack: step 2, image 1 of 2 Disassembling Sprint Sanyo RL-4920 Outer Case, Remove Battery Pack: step 2, image 2 of 2
    • Push the gray lever up towards the top of the phone.

    • Pull up on the battery pack and completely separate it from the phone.

  3. Disassembling Sprint Sanyo RL-4920 Outer Case, Screws: step 3, image 1 of 2 Disassembling Sprint Sanyo RL-4920 Outer Case, Screws: step 3, image 2 of 2
    • Locate the five screws around the back casing.

    • Use a three-prong screw bit to remove all five screws.

  4. Disassembling Sprint Sanyo RL-4920 Outer Case, Separate Cases: step 4, image 1 of 1
    • Use the plastic opening tool and slide it around the phone to pull apart the front and back casing.

  5. Disassembling Sprint Sanyo RL-4920 Outer Case, Separate Cases: step 5, image 1 of 1
    • Separate the two cases.

  6. Disassembling Sprint Sanyo RL-4920 Outer Case, The Front Case: step 6, image 1 of 1
    • Use the plastic opening tool to remove the motherboard from the front case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Austin Shores

Member since: 10/18/13

301 Reputation

3 Guides authored

Team

Clemson, Team 13-5, Benson Fall 2013 Member of Clemson, Team 13-5, Benson Fall 2013

CLEM-BENSON-F13S13G5

3 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 213