Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide will teach you how disassemble and reassemble 1.3 megapixel camera to your Samsung Gravity SGH-T459.

  1. Press and hold the End key to power down the cell phone.
    • Press and hold the End key to power down the cell phone.

    • Gently remove the back cover with your fingers by sliding it in the direction of the arrows.

  2. Gently lift up and remove battery with your fingers in the direction of the arrows.
    • Gently lift up and remove battery with your fingers in the direction of the arrows.

  3. LCD iPhone Screen Fix Kits

    The budget option, covered by our Lifetime Warranty.

    Shop Kits

    LCD iPhone Screen Fix Kits

    Cut repair costs, not quality.

    Shop Kits
  4. Hold the cell phone steady with one hand. With the other hand, use a Phillips screwdriver to remove all 6 screws around the edges of the rear case. Slide the phone open. Use a plastic prying tool to pry open the edge of the green trim near the space bar of the keypad. You should hear the rear case unsnap.
    • Hold the cell phone steady with one hand. With the other hand, use a Phillips screwdriver to remove all 6 screws around the edges of the rear case.

    • Slide the phone open.

    • Use a plastic prying tool to pry open the edge of the green trim near the space bar of the keypad. You should hear the rear case unsnap.

    • Gently lift and remove the rear case from the cell phone.

  5. Gently lift and remove the 1.3 megapixel camera with your fingers. Gently lift and remove the 1.3 megapixel camera with your fingers.
    • Gently lift and remove the 1.3 megapixel camera with your fingers.

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 511