Disassembling PlayStation 2 Slimline Outer Shell

Step 1 Outer Shell

• Disconnect all cables from the console and flip the unit over to reveal its base.
Step 2




• Locate the 6 feet on the base of the unit. Pry them off using a spudger to reveal the screws.
• Note: One of the feet is located under the sticker shown in the photo. Removing this sticker will void any warranty with Sony.
Step 3
• Remove all six 4.0 mm screws from the base of the unit using a #1 Phillips screwdriver.
Step 4
• Starting at the corner at which the power and Ethernet ports are located, pry open the outer shell using a spudger and continue around the entire unit.
• Note: You may use your hands for additional force to separate the two pieces of the outer shell.

Author

with 1 other contributor

Thomas Sullivan

Member since: 10/23/13

3,927 Reputation

6 Guides authored

Badges: 14

• 
• 
• 

+11 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview