Philips Marathon Vacuum FC9202 disassembly

Step 1 Philips Marathon Vacuum FC9202 disassembly




• To open the unit, first remove the filter cover, by removing the hinge after removing the end caps
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• dismantle the handle of the filter cover, removing the Torx screws hidden under the handle
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• the chrome plate can be removed with a screwdriver
• remove the min/max button and the on/off button; removal of a torx screw
• electronic card update
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• To remove the housing, you must remove 7 additional Torx screws
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Rear filter removal
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Removal of 4 torx screws
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 7
• 2 Torx screws under the hinge
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 8
• 3 screws at the front of the housing
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 9
• housing removal
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Special thanks to these translators:

fr en

100%

Abel

Annika Faelker

These translators are helping us fix the world! Want to contribute?
Start translating ›

Author

with 2 other contributors

christophe

Member since: 07/14/12

806 Reputation

2 Guides authored

Badges: 8

• 
• 
• 

+5 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview