Introduction

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

Image 1/3: Image 2/3: Image 3/3:
  • Slide the notch downward while pulling the back cover off to remove it.

Add Comment

Image 1/3: Lift upwards to remove the battery. Image 2/3: Lift upwards to remove the battery. Image 3/3: Lift upwards to remove the battery.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

Add Comment

Image 1/2: Remove the aluminum cover. Image 2/2: Remove the aluminum cover.
  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

Add Comment

Image 1/3: Lift up the right part of the Nextel logo and unscrew the screw underneath. Image 2/3: Lift up the right part of the Nextel logo and unscrew the screw underneath. Image 3/3: Lift up the right part of the Nextel logo and unscrew the screw underneath.
  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

Add Comment

Image 1/2: Gently lift the back cover off. Image 2/2: Gently lift the back cover off.
  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Carefully pry off the connection between the headphone jack and logic board.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Member since: 04/14/2010

7 Reputation

2 Guides authored

Team

Cal Poly, Team 29-61, Johann Spring 2010 Member of Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,238