Introduction

After the batteries are removed the case can be disassembled.

Parts

No parts required.

  1. First, apply pressure with your thumb on the top of the battery cover.
    • First, apply pressure with your thumb on the top of the battery cover.

  2. Next, pull down on the cover until it begins to slide.
    • Next, pull down on the cover until it begins to slide.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).
    • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

  5. Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.
    • Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.

  6. Detach back part of the case by gently lifting up.
    • Detach back part of the case by gently lifting up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

James Tucker Dunn

Member since: 01/18/2013

371 Reputation

6 Guides authored

Team

Cal Poly, Team 19-43, Regan Winter 2013 Member of Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 Members

9 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 11

All Time: 1,235