Disassembling Marshall MS-2 Micro Amp Case Disassembly

You're viewing a previously published version of this guide. View latest version

Jul 31, 2014 - 01:18:00

Jun 24, 2022 - 09:41:11 Feb 24, 2022 - 01:31:03 Jul 31, 2014 - 01:18:00 Jan 28, 2014 - 03:04:40 Dec 17, 2013 - 10:35:09 Dec 17, 2013 - 10:35:07 Dec 05, 2013 - 12:19:01 Dec 05, 2013 - 12:19:01 Dec 03, 2013 - 08:25:38 Dec 03, 2013 - 08:25:38 Dec 03, 2013 - 08:24:13 Dec 03, 2013 - 08:24:13 Dec 03, 2013 - 08:23:45 Dec 03, 2013 - 08:23:45 Dec 02, 2013 - 09:47:43 Dec 02, 2013 - 09:46:57 Dec 02, 2013 - 09:46:57 Dec 02, 2013 - 09:46:02 Dec 02, 2013 - 09:46:01 Dec 02, 2013 - 09:44:10 Dec 02, 2013 - 09:44:10 Dec 02, 2013 - 09:43:05 Dec 02, 2013 - 09:43:05 Dec 01, 2013 - 06:10:22 Dec 01, 2013 - 06:06:00 Dec 01, 2013 - 06:05:48 Dec 01, 2013 - 05:53:15 Dec 01, 2013 - 05:53:15 Dec 01, 2013 - 05:51:55 Dec 01, 2013 - 05:49:25 Dec 01, 2013 - 05:45:53 Dec 01, 2013 - 05:42:21 Dec 01, 2013 - 05:40:33 Dec 01, 2013 - 03:13:12 Nov 25, 2013 - 05:32:09 Nov 24, 2013 - 04:50:55 Nov 24, 2013 - 04:50:51 Nov 24, 2013 - 04:49:02 Nov 24, 2013 - 04:40:38 Nov 24, 2013 - 04:36:10 Nov 24, 2013 - 04:33:50 Nov 24, 2013 - 04:33:18 Nov 24, 2013 - 04:32:30

Newer

What you need

Step 1 Case

Disassembling Marshall MS-2 Micro Amp Case Disassembly, Case: step 1, image 1 of 1

First be sure to turn the power switch to the off position.
Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

Step 2

Disassembling Marshall MS-2 Micro Amp Case Disassembly: step 2, image 3 of 3

Now remove the battery.
On the back of the device locate the battery cover.
Remove it by pushing down on the clip.
Then pull the piece of fabric until the battery comes out.

Step 3

Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.
Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.