Fix Your Stuff Community Store

Griffin iFM 4027 Right Side Panel Replacement

Introduction

A side panel is located on each side of the device. The right side panel, containing the button(s), controls the track being selected as well as the volume of the device. There are no prerequisites required for this guide.

  • A plastic pry bar is necessary to remove the panel.

What you need

  1. Griffin iFM 4027 Right Side Panel Replacement, Right Side Panel: step 1, image 1 of 1
    Tool used on this step:
    iFixit Opening Tool
    $1.99
    Buy

    • First, lodge the tip of the plastic iFixit opening tool into the top corner of the device.

    • Apply pressure upward with the iFixit Opening Tool. This should release the two panels away from each other.

    Edit

  3. Griffin iFM 4027 Right Side Panel Replacement: step 2, image 1 of 3 Griffin iFM 4027 Right Side Panel Replacement: step 2, image 2 of 3 Griffin iFM 4027 Right Side Panel Replacement: step 2, image 3 of 3

    • Use your fingers to separate the right side panel from the device.

    • Turn the panel over so that the outer edge is facing downward.

    • Use your fingers to dislodge the buttons, and then set them aside for later.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 9 other contributors

Alexander

Member since: 03/09/12

101 Reputation

6 Guides authored

Badges: 7

+4 more badges

Team

Clemson, Team 15-3, Benson Spring 2012 Member of Clemson, Team 15-3, Benson Spring 2012

CLEM-BENSON-S12S15G3

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 940