Introduction

The outer casing covers the internal mechanisms of the camera.

Parts

No parts required.

  1. Remove the 2 screws(2.41mm long) on the side of the camera next to the LCD screen.
    • Remove the 2 screws(2.41mm long) on the side of the camera next to the LCD screen.

    • Remove the 2 screws(4.08mm) on the other side. One is located under the rubber USB flap.

    • Remove the last screw(2.59mm) located on the bottom of the camera.

    • Slowly pull the back cover of the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ben Tupas

Member since: 01/13/2011

317 Reputation

3 Guides authored

Team

Cal Poly, Team 13-3, Forte Winter 2011 Member of Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 Members

8 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,573