Disassembling Canon PowerShot SD800 IS Front Cover

Step 1 Back Cover

• Remove one 2.25mm screw on the bottom.
Step 2

• Remove two 2.25mm screws on the right side looking from the front.
Step 3
• Remove one 4.7mm screw on the side with the AV output.
Step 4
• Pull off the back cover.
• The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.
Step 5 Front Cover
• Remove the 3.9mm screw in the AV housing on the left side from the front of the camera.
Step 6
• Remove one 2.25mm screw on the bottom of the camera.
Step 7
• Pull off the front cover.

Author

with 2 other contributors

Jeremy Rabaino

Member since: 10/10/10

135 Reputation

6 Guides authored

Badges: 7

• 
• 
• 

+4 more badges

Team

Cal Poly, Team 20-9, Maness Fall 2010 Member of Cal Poly, Team 20-9, Maness Fall 2010

CPSU-MANESS-F10S20G9

5 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview